How to reduce glue retention when removing self-adhesive PVC film?

Self-adhesive PVC film is deeply loved by people for its convenient sticking properties and diverse uses. But when enjoying the convenience it brings, sometimes we also encounter a problem: the glue traces left after removal. These marks not only affect the appearance, but may also cause trouble in cleaning work. So, how to reduce the glue residue when removing the self-adhesive PVC film?

We need to understand why glue leaves marks. This is mainly related to the quality of the glue and the way the film is pasted. Therefore, choosing a high-quality self-adhesive PVC film is key. When purchasing, it is recommended to choose products with good brand reputation and good reputation. These products usually undergo strict quality testing, their glue formulas are more optimized, and the possibility of glue retention is relatively small.

Correct installation methods can also help us reduce glue retention. Before installing the self-adhesive PVC film, make sure that the pasting surface is clean, smooth, and free of oil and dust. These impurities will affect the adhesive effect of the film and increase the risk of glue residue during removal. At the same time, when installing, make sure that the film is completely attached to the surface to avoid bubbles or wrinkles. This can also reduce the possibility of glue being squeezed out and remaining.

When it is time to remove the self-adhesive PVC film, we can use some techniques to reduce glue retention. First, use a professional scraper or spatula to peel off the film gradually and slowly, starting from one corner. Avoid using too much force at one time to reduce the possibility of the glue being torn out. If you encounter a difficult-to-remove section, you can use a hair dryer or heat gun to heat the film to soften the glue and make it easier to remove.

If there are residual traces of glue, we can use alcohol, special cleaners or erasers to remove them. But please note that when using cleaners, ensure good ventilation and follow product instructions to avoid damage to surfaces.